Install The Front Panel If Necessary - Miele DA 3160 Operating And Installation Instructions

5. Install the front panel
if necessary
The installation kit DML 300 is
necessary. It can be obtained as an
optional accessory from Miele. The
installation kit has an installation manual
supplied.
Weight of the front panel
The weight of the front panel must not
exceed 2.8 lbs (1.3 kg). This applies for
front panels with a depth of up to 1
(30 mm). In the case of front panels of
greater depth or greater weight, the
weight must be reduced by milling out
the back of the panel, for instance.
^ The deflector can be adjusted up to
2" (50 mm) towards the front with the
two adjusting screws left and right in
the deflector. Adjust the deflector
until it is flush with the front of the
adjacent cabinetry.
1
/ "
4
Installation
31