Volume Controls - Toshiba Perception e&ex User Manual

PERCEPTION e
ex
&
To Adjust Ring Tone:
1. Make sure the handset is on-
hook.
2. Press the VOLUME button.
3. Hold down the VOLUME
button until the desired ring
volume is set.
To Adjust the Speaker Volume:
While on an established call using
on-hook dialing, press the
VOLUME button until the desired
volume is set.
To Adjust the Handset Volume:
While the handset is off-hook on
an established call, press the
VOLUME button until the desired
volume is achieved.
Wink: 3/8-second on, 1/8-second off—indicates that a call is on
hold at another station. DN is RED.
Off: DN is idle.
All of the flexible feature buttons and some of the fixed feature buttons
have LEDs. If a feature button is activated, its LED will be RED.

VOLUME CONTROLS

The two VOLUME buttons, left of the dialpad, control the ring, speaker,
and handset volume levels. The buttons consist of two arrows: one that
points up and one that points down. To increase any of the above
mentioned volume levels, press the upward pointing arrow; to decrease
any of the levels, press the downward pointing arrow.
Either button must be held down for at least an eighth of a second
for any volume change to occur. If either button is continually held
down, the volume will continually change until the button is
released.
Continuous ring tone will be heard.
DIGITAL TELEPHONE
IMPORTANT!
3