GE Digital Video Storage System User Manual page 21

1. The Flash upgrade file and path. This file is obtained by calling GE
Security Technical Support at 1-800-469-1676. When calling, please
have the following information available:
The model number of the product.
The serial number and revision of the product
The current firmware version.
The date purchased.
Symptoms of the unit that might require upgrade.
2. The DVSe unit connected to a PC equipped with Microsoft Internet
Explorer version 5.5 or later via ethernet cable.
3. The IP address of the DVSe.
4. WaveReader software must NOT be connected to the DVSe. Please
exit all non-essential software on the PC.
5. Ensure that the DVSe is not currently recording or archiving.
Follow the steps below to Upgrade the DVSe:
Step 1. Launch the Browser software (Microsoft Internet Explorer 5.5 or
later).
Step 2. Enter the IP address of the DVSe in the address field of the Browser
followed by /upgrade.ssi and press enter. For example if the IP
address is 3.18.173.71 type 3.18.173.71/upgrade.ssi.
Step 3. The Enter Network Password window should appear. Enter the
correct Username and Password in their respective fields. (The
default username is admin and the password is admin. It is
recommended that the defaults be changed ASAP). Click the OK
button. The DVSe upgrade page should appear.
0150-0178H 21 DVSe