Recording Calls - Siemens HiPath 500 User Manual

Step by Step
)493

Recording calls

If configured (contact your service personnel for de-
tails), you can record an active call.
Prerequisite: You are conducting a call.
if available:
S
Press the "Recording" key. The LED lights up.
or
S
Press the "Consult" key. The LED flashes.
Enter the code.
You and the other party hear an announcement that re-
cording has started and as long as recording is still run-
ning, you hear an acoustic signal approx. every 15 sec-
onds.
During recording, it is not possible to add further
call parties.
Stopping recording
if available:
R
Press the "Recording" key which lights up. The LED
goes out.
or
S
Press the "Consult" key. The LED flashes.
T
Press the "Consult" key. The LED goes out.
Listening to a recording
Playback of the recording depends on the voice record-
ing system used (see the associated user guide or
page 52).
Enhanced phone functions
39