Ipv6 Firewall - D-Link DIR-868L User Manual

Section 3 - Coniguration
The DIR-868L's IPv6 Firewall feature allows you to conigure which kind of IPv6 traic is allowed to pass through the device. The DIR-868L's IPv6
Firewall functions in a similar way to the IP Filters feature.
Enable IPv6 Simple
Check the box to enable the IPv6 irewall simple security.
Security:
Conigure IPv6
Select an action from the drop-down menu.
Firewall:
Name:
Enter a name to identify the IPv6 irewall rule.
Schedule:
Use the drop-down menu to select the time schedule that the
IPv6 Firewall Rule will be enabled on. The schedule may be set
to Always, which will allow the particular service to always
be enabled. You can create your own times in the Tools >
Schedules section.
Source: Use the Source drop-down menu to specify the interface that
connects to the source IPv6 addresses of the irewall rule.
IP Address Range:
Enter the source IPv6 address range in the adjacent IP Address
Range ield.
Destination: Use the Destination drop-down menu to specify the interface
that connects to the destination IP addresses of the irewall rule.
Protocol:
Select the protocol of the irewall port (All, TCP, UDP, or ICMP).
Port Range:
Enter the irst port of the range that will be used for the irewall
rule in the irst box and enter the last port in the ield in the
second box.
Click Save Settings to save the current coniguration.
D-Link DIR-868L User Manual

IPv6 Firewall

95