Standards - Siemens SINAMICS S120 Manual

System overview

1.5 Standards

1.5 Standards
Note
Information on the listed standards
The standards listed in the table below are non-binding and do not in any way claim to be
complete. The standards listed do not represent a guaranteed property of the product.
Only the statements made in the Declaration of Conformity shall be deemed binding.
Table 1- 3 Fundamental, application-relevant standards in succession: EN, IEC/ISO, DIN, VDE
Standards* Title
EN 1037 Safety of machinery; avoiding unexpected starting
ISO 14118
DIN EN 1037
EN ISO 9001 Quality management systems - requirements
ISO 9001
DIN EN ISO 9001
EN ISO 12100-x Safety of Machinery; General Design Guidelines;
ISO 12100-x Part 1: Basic Terminology, Methodology
DIN EN ISO 12100-x Part 2: Technical Principles and Specifications
EN ISO 13849-x Safety of Machinery; Safety-Related Parts of Control Systems;
ISO 13849-x Part 1: General Basic Design Principles
DIN EN ISO 13849-x Part 2: Validation
EN ISO 14121-1 Safety of Machinery - Risk Assessment;
ISO 14121-1 Part 1: Guidelines
DIN EN ISO 14121-1
EN 55011 Industrial, scientific and medical high-frequency devices (ISM devices) -
CISPR 11 radio interference - limit values and measuring techniques
DIN EN 55011
VDE 0875-11
EN 60146-1-1 Semiconductor converters; general requirements and line-commutated converters;
IEC 60146-1-1 Part 1-1: Defining the basic requirements
DIN EN 60146-1-1
VDE 0558-11
EN 60204-1 Electrical equipment of machines;
IEC 60204-1 Part 1: General definitions
DIN EN 60204-1
VDE 0113-1
EN 60228 Conductors for cables and insulated leads
IEC 60228
DIN EN 60228
VDE0295
EN 60269-1 Low-voltage fuses;
IEC 60269-1 Part 1: General requirements
DIN EN 60269-1
VDE 0636-1
30
Manual, (GH3), 01/2013, 6SL3097-4AE00-0BP3
Chassis power units