Upgrading The Te30 Using The Bootroom System; Upgrading The Te30 From The Web Interface - Huawei V100R001 User Manual

Te30 videoconferencing endpoint
Hide thumbs Also See for V100R001:
Table of Contents

Advertisement

HUAWEI TE30 Videoconferencing Endpoint
User Guide

13.2.3 Upgrading the TE30 Using the Bootroom System

If upgrading the endpoint using its normal system fails, you can use the bootrom system for
the upgrade
Prerequisites
Before the upgrade, note the following prerequisites:
Context
The bootroom system is used for upgrades when the endpoint software malfunctions. This
method can be repeatedly used, and can ensure successful software upgrade when there are no
hardware failures.
Procedure
Step 1 While the TE30 is restarting or powering on, press and hold the MODE button for 3 seconds.
The TE30 enters the bootrom system.
Step 2 Use Telnet to log in to the TE30 and run mnt upgswitch on to enable the bootrom system
upgrade function.
Step 3 Extract the compressed software upgrade package on the computer.
Step 4 Run the upgrade program UpgradeTool.exe.
The upgrade dialog box is displayed.
Step 5 Select Browser and select the .dat file.
Step 6 Enter your TE30 IP address, for example, 192.168.1.1. Then click Upgrade.
Step 7 In the displayed dialog box, click OK to start the upgrade.
Step 8 Restart the TE30.
----End

13.2.4 Upgrading the TE30 from the Web Interface

You can configure your TE30 to be upgraded online automatically or manually. You can also
upgrade it using a local upgrade file.
Issue 01 (2013-03-27)
A copy of the target software is available on the computer.
The computer is connected to the TE30 using a crossover cable or a switch.
At this time, the TE30 has two IP addresses available: the static IP address of the normal system and the
default IP address (192.168.1.1). If the normal system IP address cannot be used for connection setup or
the TE30 fails to obtain any IP address because of the dynamic IP address or other causes, you can use
the default IP address for upgrades.
By default, the bootrom system upgrade function is disabled by default.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 Maintenance
111

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Te30

Table of Contents