Contacts Bar; Offline Profile - Nokia 5800 XpressMusic User Manual

Bluetooth and
WLAN antenna
Cellular
antenna

Contacts bar

Start using the contacts bar
To start using the contacts bar and add your contacts
to the home screen, select
contact, and follow the instructions.
To communicate with your contact, select the contact
and from the following:
— Make a phone call.
●
— Send a message.
●
— Modify contact information.
●
— Refresh the contact's web feeds.
●
To view past communication events with a contact,
select a contact. Select a communication event to view
event details.
To close the view, select
GPS antenna
> Options > New
.
© 2009 Nokia. All rights reserved.

Offline profile

To activate the Offline profile, press the power key
briefly, and select Offline.
The Offline profile lets you use the device without
connecting to the wireless network. When you activate
the Offline profile, the connection to the wireless
network is turned off, as indicated by
strength indicator area. All wireless RF signals to and
from the device are prevented. If you try to send
messages, they are placed in the Outbox folder to be
sent later.
When the Offline profile is active, you can use your
device without a SIM card.
If the SIM card is not properly in place, the device starts
in the Offline profile.
Important: In the Offline profile you cannot
make or receive any calls, or use other features that
require cellular network coverage. Calls may still be
possible to the official emergency number
programmed into your device. To make calls, you must
first activate the phone function by changing profiles.
If the device has been locked, enter the lock code.
When you have activated the offline profile, you can
still use the wireless LAN, for example, to read your e-
mail or browse on the internet. Remember to comply
with any applicable safety requirements when
establishing and using a wireless LAN connection. You
can also use Bluetooth connectivity while in the offline
profile.
To switch to another profile, press the power key
briefly, and select another profile. The device re-
in the signal
19