Siemens HiPath 4000 Operating Manual page 36

Making Calls – Basic Functions
Step by Step
FWD-VAR-ALL-INT
Next forwarding type?
FWD-VAR-ALL-EXT
Next forwarding type?
FWD-VAR-ALL-INT
Enter destination:
v
Program/Service?
Destinations?
Call forwarding?
Next forwarding type?
Next forwarding type?
Enter destination:
v
Save?
36
Output in the first line.
off
Output in the second line.
>
v
OK
or
Edit or confirm the call forwarding type to select the
next call forwarding type.
Output in the first line.
off
Output in the second line.
>
v
OK
or Edit or confirm the call forwarding type to select the
next call forwarding type.
Output in the first line.
off
Output in the second line.
Programming/changing a call forwarding destina-
tion
OK
Select and confirm.
OK
Confirm.
OK
Confirm. "FWD-VAR-ALL -BOTH" is displayed.
OK
Confirm. "FWD-FIXED" is displayed.
>
OK
Confirm. "FWD-VAR-ALL -INT" is displayed.
>
OK
Confirm.
~
Enter the station number of the call forwarding destina-
tion. An existing destination is overwritten.
OK
Select and confirm if the station number is complete.
To select another call forwarding type, proceed as de-
scribed on
If variable call forwarding was already programmed and
activated, it is now deactivated and the call forwarding
destination is deleted (for exception, see
Fixed call forwarding is deactivated.
Deleting the call forwarding destination
A variable call forwarding destination is automatically
deleted by deactivating the call forwarding type.
Page 35.
Page 35).