Advertisement
Thank you on your
purchase of the GE
LED Spotlight
Included items:
Spotlight
2 - 25 mm screws and screw anchors
1 - 44 mm screw
The LED Spotlight time setting feature
Time can be set at either 30 seconds or 2 minutes. Unit turns on
when dark and when it detects motion. Unit turns on for the time set
by the switch ( 30 sec. or 2 min.) then turns off if no motion
is detected.
Light Sensor - The LED Spotlight only turns on in the dark -
to conserve battery life.
Brightness Settings -
1. "Bright" for maximum light output
2. "Dim" for maximum battery life
Remove the front cover by rotating
counter-clockwise.
(see photo)
LED Spotlights time setting feature -
Time can be set at either 30 seconds or two minutes.
1. Setting the LED Spotlights time setting feature:
To set your automatic shut-off time to 30 seconds
or two minutes. Use a pencil to move the switch to
the desired position.
NOTE: The LED Spotlight will stay on as long as there
is motion detected.
2. Setting the brightness -
Use a pencil to move the
switch to the desired position. (see photo)
Advertisement
