Changing The Administration Menu Password - HP StorageWorks 1900ux User Manual

5. Press NEXT or PREV until the third number of your password displays and

Changing the administration menu password

READY
To protect the system from unauthorized access, change the password from the
factory default setting:
1. With READY displaying on the control panel, press NEXT until ADMIN*
2. TEST * displays, indicating that the password was accepted. Press NEXT
3. Press NEXT or PREV or until NEW PASSWORD displays and then press
4. NEW 000 000 000 displays and the first set of three zeros flashes. Press
5. Press NEXT or PREV until the new number you want to assign to the second
6. Press NEXT or PREV until the new number you want to assign to the third
7. PASSWORD CHANGED displays. Press CANCEL three times to return to
8. Power off the jukebox, then power it back on to save the password to the
Note:
representative to reset the security code to the factory default.
HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User's Guide
then press ENTER. TEST * displays, indicating that the password was
accepted. You are now in the menu tree below ADMIN*.
> ADMIN*
displays, then press ENTER and enter the password.
until CONFIG * displays and then press ENTER.
ENTER.
NEXT or PREV until the new number you want to assign to the first part of
the password displays and then press ENTER. The second set of three zeros
flashes.
part of the password displays and then press ENTER. The third set of three
zeros flashes.
part of the password displays and then press ENTER.
READY.
jukebox flash ROM.
Be sure to document your new password. If you forget it, contact your service
> PSWD 000 000 000
Navigation
>CONFIG*
35