18
en | Quick install
3.2
First-time use
The unit first determines if camera inputs are PAL or NTSC and selects the output mode for
the monitor. If only IP cameras are connected, the system defaults to PAL. The unit starts with
a multiscreen display.
See Section 4.4 Camera connections, page 26 for more details and for instructions on
overriding the operating mode.
The Quick install menu opens the first time the unit is used. Fill in the basic settings in the
tabs to get the unit operational. The unit begins recording automatically when the Quick
install menu is closed.
To open the Quick install menu at any other time:
1.
2.
3.
Navigating
Use the USB mouse or the following front panel keys:
–
–
–
F.01U.246.471 | v3.4 | 2011.06
Press the menu
button.
The main menu appears on monitor A.
Click Configuration and then Quick install.
Use the enter
button to select a submenu or item.
Use the arrow
Use the escape
Installation and Operation manual
buttons to move through a menu or list.
button to go back or to switch off the menu.
Divar 700 Series
Bosch Security Systems