Input Signal Selection For The Av/Rgb Input Connector; Master Volume Control - Sony SRP-X500P System Integration Manual

SRP-X500P System Integration Guide
Input Signal Selection for the AV/RGB INPUT
Connector
The following is an example of selecting input signals to
the AV/RGB SELECT A to C using three push switches.
I Setting
1. Connect three push switches to INPUT 1, INPUT 2,
and INPUT 3 of the PARALLEL REMOTE connector on
the SRP-X500P.
2. Select AV/RGB SELECT A on the
PARALLEL/PROJECTOR CONTROL screen. This
selection appears on a drop-down list on INPUT 1.
Select AV/RGB SELECT B on the PARALLEL/PROJECTOR
CONTROL screen. This selection appears on a drop-
down list on INPUT 2. And then select AV/RGB
SELECT C on the PARALLEL/PROJECTOR CONTROL
screen. This selection appears on a drop-down list on
INPUT 3 (Fig. 8).
I Status
The relationship between the switches and the input
signals is as follows (Fig. 9):
- Press to select one of the devices connected to the
AV/RGB INPUT connector.
Fig. 8 Setting of the PARALLEL REMOTE
Press switch
INPUT 1
(AV/RGB A)
Press switch
INPUT 2
(AV/RGB B)
INPUT 3
(AV/RGB C)
A
AV/RGB B
C
SELECT
D
E
Fig. 9 Switch and AV/RGB SELECT Status
18
Press switch
A A
B B
C C
D D
E E

MASTER Volume Control

The following is an example of raising or lowering the
MASTER volume using two push switches.
I Setting
1. Connect two push switches to INPUT 1 and INPUT 2
of the PARALLEL REMOTE connector on the
SRP-X500P.
2. Select MASTER VOLUME UP on the
PARALLEL/PROJECTOR CONTROL screen. This
selection appears on a drop-down list on INPUT 1.
Then select MASTER VOLUME DOWN on the
PARALLEL/PROJECTOR CONTROL screen. This
selection appears on a drop-down list on INPUT 2
(Fig. 10).
I Status
The relationship between the switches and the input
signals is as follows (Fig. 11):
- Pressing the switch raises or lowers the MASTER
volume.
Fig. 10 Setting of the PARALLEL REMOTE
INPUT 1
(MASTER
VOLUME UP)
Press switch
INPUT 2
(MASTER
VOLUME DOWN)
MASTER
VOLUME
Stop Up
Fig. 11 Switch and MASTER VOLUME Status
Press switch
Stop Down Stop