D-Link Air DWL-520 Manual page 16

Troubleshooting
Checking the installation of the DWL-520
In Windows 2000:
To check that the DWL-520 is installed properly, please do the following:
1. Check the Windows 2000 Diagnostics.
conflict in the resource allocation or the I/O Address, IRQ
allocations.
already assigned to some other devices, you must change that
value. I/O Address needs 40h byte length.
2. Go to the Control panel. Double click on the PCI Card, you will
see D-Link DWL-520 PCI Adapter. Double clicking on that will
show you the Card Information, driver name and the driver file.
You must confirm the name of the driver and the driver file as
"prismnic.inf" and "prismnds.sys".
names listed above, there are some problems and the driver is
not installed properly. Reinstall the driver.
Note: Check the PnP BIOS setup menu and select no in case of the
D-Link DWL-520 PCI Adapter installation.
(continued)
If you find that the IRQ or I/O Addresses are
16
See if there is any
If you do not find the