Cpu; Dram; Hdd - Acer PC2120 User Manual

PC 2120 All-in-One 12.1" TFT LCD Panel PC User's Manual

3.1 CPU

The standard PC 2120 series solely uses a Pentium III/Celeron-grade
supported CPU card (SBC85610VE). In further classifying the CPU
cards of the other systems.

3.2 DRAM

The PC 2120 series system control board, SBC85610VE, provides 2 x
168-pin DIMM supporting system memory up to 1GB.

3.3 HDD

The standard packing will reserve a 3.5" hard disk drive bay. If the
user intends to install or remove the device for repair or for a
higher-capacity one, then follow the installation instructions and
diagram below.
1. Product Finished.
2. There are 19 screws that fasten the rear cover on to the
main unit. Take out the screws and pull out the rear
cover.
3. To remove the VEA bracket, loosen and take off the 5
screws (2 on each side) that bolts the bracket to the
main unit.
4. loosen and take off the 3 screws (2 on each side) that
bolts the
5. To remove the HDD bracket and Riser card.
6. Loosen and take off the 7 screws (2 and 3 on each side)
that bolts the bracket to the main unit.
7. Repeat step2 to step6 for assembling.
16 Hardware Installation