NEC Express5800 User Manual page 84

4-14 Configuring Your Server
PCI Configuration submenu
When [PCI Configuration] is selected in the Advanced menu and then the Enter key is pressed, the
screen below is displayed.
For details about the options, see the following table.
Option
LAN Controller
LAN1 Option ROM
Scan
LAN2 Option ROM
Scan
PCI Slot 1-6
Option ROM
IMPORTANT: For a RAID controller, LAN card (network boot), or
Fibre Channel controller, if no hard disk drive on which an OS is
installed is connected, set the option ROM for that slot to [Disabled].
Parameters
Disabled Specify whether to enable or disable the onboard LAN
[Enabled] Controller.
Disabled Specify the boot method for LAN1, which is onboard.
[PXE Boot]
iSCSI Boot
Disabled Specify the boot method for LAN2, which is onboard.
[PXE Boot]
iSCSI Boot
Disabled Specify whether to enable or disable an option ROM for
[Enabled] a RAID controller installed in a slot dedicated to RAID
controllers.
Description
[ ]: Factory-set