LRM2070, LRM2080, LRM2090 Datasheet
OccuSwitch DALI sensor/controller
LCC2070
LCC2080
cable set
cable set
L N
L N
7-pole
STELVIO
plug MRT3
P 5,08/07
500
V01 VE
Dimensions in mm
80
95
52 mm
2 inch
7-pole
STELVIO
plug MRT3
P 5,08/07
V01 VE
40 mm
60 mm
Ø 95 mm
General description
The OccuSwitch DALI is a combined sensor and controller. It will dim
and switch on the lights in a room or area on occupancy and available
daylight, with options for local override, parallel operation and network
links to Building Management Systems (BMS).
Savings of up to 75% can be achieved with functions like daylight
depending dimming, occupancy control and over dimension correction.
The OccuSwitch DALI is designed for an office area of 20 to 25 m
or a classroom of around 40 m
tripled, with the extension sensor LRM8118. Up to 15 drivers (usually
luminaires) can be controlled.
A detachable wiring connector enables easy installation and mounting
in the ceiling. Separate Wieland cables are available for an even easier,
faster, trouble-free installation.
It is possible to link up to 22 (advanced only) OccuSwitch DALI units in
parallel to cover larger areas with a specific "open plan" mode to ensure
maximum comfort and savings.
The LRM2090 can be linked to most BMS or other control systems that
have standard DALI interfaces (up to 64). This makes simple yet very
effective control scenarios possible in a building.
The OccuSwitch DALI family exists of:
LRM2070
Basic functionality
LRM2080
Parallel operation
LRM2090
DALI interface for BMS or other network
LCC2070
Wieland cable for LRM2070
LCC2080
Wieland cable for LRM2080 and LRM2090
LRH2070
Ceiling mounting box
LCU2070
IRT9090
Extended IR programming tool
2
but the area can be doubled, or even
1/15
,
2