Advertisement
Anamorphic Mode Function
The SRX-R320P allows squeezed images (16:9 or 1.896:1) to
be changed to 2.39:1 un-squeezed images. This can be
done electrically without an anamorphic lens.
Color Space Conversion (CSC)
Function
The SRX-R320P features a Color Space Conversion (CSC)
function, which helps users easily adjust the projector's
color space to that which is defined in the DCDM (Minimum
D-Cinema Color Gamut) or ITU-R BT.709. The target color
gamut parameters required to meet the DCDM or ITU-R
BT.709 standards can also be applied to the projector
with this function. The internal test generator simplifies
adjustment and lets the operator align the projector in
minutes.
Gamma Curve Selection
The SRX-R320P provides three preset gamma curve values.
Users can select an optimum value from 1.8, 2.2, and 2.6
according to the desired color tone.
Lens Shift Function
The SRX-R320P is equipped with a lens shift function that
allows projected images to be moved up and down or
from side to side. This lens shift function can be operated
manually via the finger screws incorporated on the
projector's unit. Using this function, the position of the
projected images can be moved vertically by -50% to +50%
and horizontally by -5% to +5%.
Keystone Masking
To compensate for keystone distortion, which typically
occurs when the projector is not installed directly in front of
the screen, the SRX-R320P has an image-masking function.
To determine the best position for the masking, this function
allows users to set further two points in addition to the four
corner points, which is particularly useful when projecting
onto a curved screen.
Select four corner positions to mask the area outside the perimeter.
For curved screens, select two positions at the apex of the curve,
one at the top and one at the bottom of the screen.
Zoom/Focus Memory Function
The SRX-R320P is equipped with zoom and focus memory
functions that make it easy to switch the projection
between two types of aspect ratios.
When used with an optional zoom lens – such as the
LKRL-Z211, LKRL-Z214, LKRL-Z219, LKRL-Z119, or LKRL-Z122 – the
zoom and focus positions for the 1.85:1 screen format
and 2.39:1 CinemaScope can be stored in the projector's
memory and then instantly recalled from there. This allows
for full-screen display regardless of the aspect ratio. An
electronic vertical alignment feature is included in the
same memory to compensate for vertical changes in the
image, should the projector be mounted at a downwards
angle.
Masked area
7
Advertisement
