Static-Sap - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
2.1.5

static-sap

This command sets the static SAP information.
Input Format
Setting information
Change settings
Insert settings
Delete settings
Display settings
Parameters
Description:
Default:
Range of value:
Description:
2-14
This parameter specifies the registered static server name.
Cannot be omitted
Maximum of 47 characters.
This parameter specifies the service type (4-digit hexadecimal
number). The reference values are shown in Table 2-1 below.
GR2K-GA-0014
Ver. 07-02