Best Position Setting - Hitachi HTD-K160 Instruction Manual

Best P Best P osition Setting osition Setting

Best Position Setting

Best P Best P osition Setting osition Setting
Note
•
Do not place the center and rear speakers far away from the
listening position than the front speakers.
•
Avoid positioning the speakers in corners, as this will boost the
bass tones too much.
•
Placing the speaker behind curtains, furniture etc. will reduce
the treble response, thus reducing the stereo effect
considerably. The listener should still be able to see the
speaker.
•
Each room has different acoustic characteristics and position-
ing possibilities are often limited. You can find the best position
for your speakers by experimenting. In general, the speakers
should be arranged as symmetrically as possible.
Height Height
Height Height Height
•
The best height for front and center speaker is at the height of
your ears (while seated).
•
The height of the rear speakers is not less than the height of
your ears (while seated).
See the following diagram. It's advisable to place the rear
speakers in the area. However you can place them in the
D
area, too.
C
C
D
32
C
o
60
D
30 o
T T T T T o specify the balance of o specify the balance of the speak- o specify the balance of o specify the balance of
o specify the balance of
ers ers
ers ers ers
You can use the Test Tone function to check whether all the speak-
ers are connected correctly, and to specify the balance of the
speakers.
1.
Press the 'on' in Speaker Setup page.
You will hear the test tone from Front-left speaker, Center
speaker, Front-right speaker, Surround-right speaker and
Surround-left speaker in sequence.
2.
Sit at your listening position, use the VOLUME - or + buttons
to adjust the level of each speaker.
Adjust the volume level so that the volume of the test tone
from each speaker sounds the same.
The adjusted value will appear on the front panel display and
TV screen. If you do not operate the remote for a few seconds,
the value turns off and is stored in the system.
3.
Press 'OFF' to turn off the test tone.
Note
•
The playback will pause during test tone.
•
The test tone only tests the valid speakers, depending the cur-
rent listening mode.
T T T T T o specify the le o specify the le o specify the le o specify the lev v v v v el of o specify the le
ers ers ers ers ers
You can vary the level of each speaker as follows. At the same
time, you can adjust the Treble of the front speakers.
1.
Press the SELECT button to select a channel. The level of
the channel will appear on the front panel display and TV
screen.
TRE (Treble level) adjustable range: -10 dB to +10 dB, 2 dB/
step.
FL (Front-left level), CNT (Center level), FR (Front-right level),
SR (Surround-right level), SL (Surround-left level) and SUB
(Subwoofer level) adjustable range: -15 dB to
dB/step.
2.
Use the VOLUME - and VOLUME + buttons to adjust the
selected channel's level.
3.
If you do not press the SELECT or VOLUME - / + buttons for
a few seconds, the values turns off and is stored in the system.
Note
•
The optional items vary with the changing of listening mode.
To adjust the volume of all the speakers (Master Volume)
at one time
Use the VOLUME - and VOLUME + buttons in normal mode.
T T T T T o shut of o shut of o shut off f f f f all of o shut of o shut of all of speak all of all of all of
Press the MUTE button. Shut off all of speakers' output.
Press it a second time to release muting and resume the
normal output.
the speak- the speak- the speak-
the speak-
el of el of el of the speak- el of the speak- the speak- the speak- the speak-
+10 dB, 1
speak speaker speak speak er er er ers' s' s' s' s' output output output output output