Non-Fire Trouble Events; Status Leds; Table 1: Status Leds - Bosch D1255RB User Manual

6.7

Non-Fire Trouble Events

You can program your keypad to emit a repeated pattern of
three warble tones, followed by a pause when a trouble
event, such as an AC failure, occurs.
The keypad display shows the number of non-fire trouble
(A1 ## TROUBLES), then custom text for each activated
point.
Silencing Non-Fire Trouble Events
To silence a non-fire trouble:
On the D1255RB Keypad, enter a personal passcode and
press [ENT].
On the D1256RB Keypad, press [TROUBLE SILENCE].
To clear the trouble message from the display, enter
[COMMAND] [4]. To review cleared troubles, use [NEXT]
and [PREV] or the VIEW MEMORY ? function.
Bosch Security Systems, Inc. | 8/06 | F01U011793B
Fire System | User's Guide | 7.0
7.0

Status LEDs

Four LEDs provide a quick indication of the fire system
status.

Table 1: Status LEDs

LED Activates:
When fire alarm
Fire
condition exists.
After an alarm condition
Silenced
is silenced.
When any point
Supervisory
programmed as
supervisory is
not normal.
When any system
Trouble
trouble or point trouble
exists.
Status LEDs
Turns off when:
All fire alarm points
return to normal.
[ANNUNCIATOR
RESET] key is pressed.
All supervisory points
that are not normal
return to normal.
The system and all
points return to normal.
21