IM-MT899H/IM-MT899W
Using with the Rechargeable Battery
OPERATION MANUAL
Charging
When the rechargeable battery is used for the first time
or when you want to use it after a long period of disuse,
be sure to charge it fully.
1
Insert the rechargeable battery.
2
Connect the AC adaptor.
3
Place the unit on the battery charger.
When the portable MD is turned on or operating, the
battery will not be charged.
No operation can be performed whilst charging. If you
try to operate, "CH" will appear.
After the rechargeable battery is charged or used, it
will get slightly warm. This is normal.
Caution:
Use the specified battery AD-N55BT only. Do not
charge a battery (nickel-cadmium, alkaline, etc.) other
than that specified.
Do not remove the outer cover of the re-
chargeable battery. It may cause heat gen-
eration, fire, or explosion.
Do not dip the battery in water, do not dis-
pose of it in a fire, and do not take it apart.
If the rechargeable battery terminal is dirty, charging
may not start. In such a case, wipe off the dirt with a
dry cloth.
Do not disassemble the battery.
– 6 –