Yamaha RHINO YXR45FW Owner's Manual page 106

6. Apply a light coat of engine oil to the
O-ring of the new oil filter cartridge.
NOTE:
_
Make sure the O-ring is seated properly.
_
1. O-ring
7. Install the new oil filter cartridge with an
oil filter wrench, and then tighten it to the
specified torque with a torque wrench.
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
1. Oil filter cartridge
8. Install the engine oil drain bolt, and then
tighten it to the specified torque.
Tightening torque:
Engine oil drain bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
9. Add the specified amount of recommend-
ed engine oil, and then install the engine
oil filler cap and tighten it.
8-12
2. Torque wrench