Cable Connection - Yamaha CDR400Atx Series User Manual

Cable Connection

Power cable
Insert the power cable securely to the "AC IN" connector on the rear
panel.
SCSI cable
Connect the SCSI cable to either of the CDR400Atx rear panel SCSI
connectors (1) or (2), and connect the other end of the SCSI cable to
the host computer.
The CDR400Atx is not supplied with a SCSI cable. You will need to
obtain one that will fit the drive and the host computer connectors.
AC I N
Chapter 3 - Installing the Yamaha CDR400Atx Drive
AC I N
SCSI-1
SCSI-2
LINE OUT
CDR ID
R
TERMINATOR
1
OFF ON
SCSI-1
SCSI-2
LINE OUT
CDR ID
R L
TERMINATOR
1
OFF ON
To the next SCSI device: host
computer, hard disk drive, etc.
L
9