Refilling - LG D1452WF Owner's Manual

Hide thumbs Also See for D1452WF:
Table of Contents

Advertisement

HOW TO USE AND OPERATE

5. Refilling

■ For refilling Rinse Aid
Depending on the dosage setting and the
number of washes, the chamber may need to be
topped up, approximately once a month. The
rinse aid level can be checked by two methods.
• By the indicator window on the dispenser
when the dishwasher door is fully open.
● Black indicates sufficient Rinse Aid
○ Clear indicates Rinse Aid required
• By the light on the control panel, being lit,
when the dishwasher is working on.
When the lamp is lit, it means the rinse
aid is almost empty. Refill the Rinse Aid
chamber as soon as possible.
NOTE
Rinse Aid Information
Rinse Aid is necessary to remove spots
and streaks of the water from dishes as
well as improved drying. Using the correct
amount will improve wash performance.
However, using too much can produce
excess foam leading to possible water
leaks.
Rinse-Aid Indicator
Adjust Lever (Rinse)
■ For refilling Salt
When the salt container is empty, the salt refill
lamp will automatically turn on during
operation. The salt should be refilled after the
cycle has finished. We recommend the salt refill
should always be carried out, as mentioned on
previous page, prior to starting the next
operation. This will immediately thin and drain
away any excess salt solution.
When the lamp is lit, this means that the
salt aid is almost empty. Refill the Salt
Aid chamber as soon as possible.
NOTE
• After filling with salt, it may take a little
while before the indicator light turns off.
• When the control is set to
necessary to fill up with salt as no salt is
consumed while the dishwasher is
operating. If the control is set between
and
, then salt must be added to the
salt container.
WARNING
• Do not pour detergent into the salt
container. This will destroy the water
softener.
23
, it is not

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents