Advertisement
ASSEMBLY TO ADVANTIUM 240V BUILT-IN SPEEDCOOK OVEN
[]
REMOVE
PACKAGING
AND
PARTS
• Remove the drawer from the carton.
• Remove all packing material and tape.
• Open the drawer and remove anu parts inside.
• Locate parts.
Assernblg
Instructions
Side Supports (2)
Assemblg
Color Hotched
Brass Screws
Instructions
Screws
(/4required,
(/4required,
2 extra)
i e×tra)
[]
[]
[]
ASSEMBLING THE OVEN TO DRAWER
Place storage drawer on a surface with the
front of drawer hanging over the edge of the
surface. Not placing the front edge of drawer
over the edge of the surface mau result in
damage to the drawer since the front edge of
drawer hangs below the bottom
of drawer.
Place the oven on top of the storage drawer.
Hake sure that the back and sides of the oven
align with the back and sides of drawer.
NOTE: The bottom of the oven side flanges will
sit directlu in front of the top of the storage
drawer side flanges.
ASSEMBLINGTHE OVEN TO DRAWER
(CONT.)
[]
Remove the front two bottom screws on each
side of the oven and the top center screw on
each side of the storage drawer.
/
/
J
[]
Place the side supports
into the tabs on the
drawer and secure using the screws supplied
and the screws removed in Step C.
!
[]
The oven and storage drawer assemblu
is now
read U to be installed. Return to the Advantium
240V Built-In SpeedCook Oven Installation
Instructions
to complete the installation.
Printed in Korea
2
Advertisement
