Outgoing Trunk Queuing (Otq Or Queue) - Hitachi SelecSet 900 Series User Manual

O T
UTGOING RUNK

Outgoing Trunk Queuing (OTQ or QUEUE)

About
outgoing trunk
queuing
Activating
outgoing trunk
queuing
2-20
Q (OTQ
UEUING
The outgoing trunk queuing feature is used when you try
to make an outside call and the outside trunk is busy. You
can have the system call you when the trunk is free.
Depending on how your system is set up, when you
attempt to dial an outgoing call and hear busy tone...
1
Lift your handset or press <SPKR>.
2
Press the <OTQ> key or remain off-hook for five
seconds.
3
Your display shows the active CAP and the text
Queued
4
Listen for confirmation tone (three short beeps).
5
Press the <OTQ> key to cancel the feature or wait for
callback.
6
Hang up.
7
The system calls you with a triple ring when the line
is free.
8
Lift your handset. The number you called rings.
You see this display when the system calls you back. The
top line shows the active CAP, your 5-digit station
number, and identifies the call as a callback. The second
line displays your name.
QUEUE)
OR
HCXTD850, Rev. A02, August 2001
S S 900 U
ELEC ET SER
G
UIDE