Paper Misfeed In The Bridge Kit; Paper Misfeed In The Finisher And The Hole Punch Unit - Toshiba E-studio2555c Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
When the finisher is installed, close the Bridge Kit
6
cover.
Close the automatic duplexing unit cover.
7
 Paper misfeed in the Bridge Kit
Open the cover holding the handle of the Bridge Kit.
1
Remove the misfed paper inside the Bridge Unit.
2
If the misfed paper cannot be removed because the right side is
caught by the fuser unit, follow the steps on  P.23 "Paper misfeed
in the fuser unit".
3 Close the Bridge Kit cover.
 Paper misfeed in the Finisher and the Hole Punch Unit
Paper misfeed in the upper receiving tray
1 Raise the lever and open the upper receiving tray of
the finisher.
1 TROUBLESHOOTING FOR THE HARDWARE
2
Clearing a Paper Misfeed
1
25