Fujitsu ETERNUS DX80 S2 User Manual page 152

Appendix A Event Notification Message List
A.2 Message List
Sense code
SK ASC
06 F2
06 F2
06 F2
06 F2
06 F2
06 F2
06 F2
06 F2
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
06 FB
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
ASCQ
89 Rebuild has not started.
89 Redundant copy has not started.
8A Rebuild is halted.
8A Redundant copy is halted.
8B Rebuild is halted.
8C Copyback is halted.
8D Copyback is halted because an error is found in the copy
source drive.
8D Redundant copy is halted because an error is found in the
copy source drive.
01 CM error is detected.
02 CM DMA port error is detected.
03 CM BIOS error is detected.
04 CM RTC error is detected.
05 CM NVRAM error is detected.
06 CM EXP error is detected.
08 CM DI port error is detected.
09 CM EXP IN port error is detected.
0A CM EXP OUT port error is detected.
0B Many correctable errors occurred in the CM memory.
0C CM BUD error is detected.
0D CM FAN error is detected.
0E CM NAND Controller error is detected.
0F CM SCU error is detected.
10 CA error is detected.
11 CA port error is detected.
21 CM FPGA error is detected.
22 CM LAN port error is detected.
Copyright 2013 FUJITSU LIMITED
Description
152
Remarks
This sense code is notified when
"Rebuild/Copyback w/o redundant" is
enabled for Error Severity Level in the
event notification setting.
This is not notified during maintenance
operations.
This sense code is notified when
"Redundant" is enabled for Error Severity
Level in the event notification setting.
This is not notified during maintenance
operations.
This sense code is notified when
"Rebuild/Copyback w/o redundant" is
enabled for Error Severity Level in the
event notification setting.
This is not notified during maintenance
operations.
This sense code is notified when
"Redundant" is enabled for Error Severity
Level in the event notification setting.
This is not notified during maintenance
operations.
This sense code is notified when
"Rebuild/Copyback w/o redundant" is
enabled for Error Severity Level in the
event notification setting.
This is not notified during maintenance
operations.
This sense code is notified when
"Redundant" is enabled for Error Severity
Level in the event notification setting.
This is not notified during maintenance
operations.
These messages are notified when
"Parts Warning" is enabled for Warning
Level in the event notification setting.
They are not notified during
maintenance operations.
P3AM-4842-12ENZ0