Filters; Dust Bag - GE 106575 Owner's Manual

12 amp upright 15" cleaning path
Table of Contents

Advertisement

Available languages

Available languages

To Remove Bag:
2. Grasp the paper bag collar and pull bag out away
from unit.
To Replace Bag:
3. Locate channels (A). Fold collar of new bag (B) back
and slide into channels making sure hose inlet (C)
goes into bag opening.
4. Tuck bag into bottom and along sides.
5. Place tabs on lower part of front cover into cleaner
slot. Close cover. Make sure disposable bag is not
caught under front cover.
Use GE brand replacement bag, Style GE-1,
Part No.106605.
Cleaning and Replacing Filters
Motor Filter
Check the motor filter with each disposable dust bag change. Clean or replace as needed. Never operate without
motor filter in place.
To Clean/Replace Motor Filter
1. The motor filter is located at the bottom of the bag
compartment. Remove bag compartment cover and
dust bag. Lift motor filter up and out of the unit.
2. Replace motor filter or clean. To clean motor filter
shake filter to remove excess dust. If necessary, the
filter can be cleaned by vacuuming with another
cleaner.
3. Reinstall filter by placing smooth side down in the
bottom of the bag compartment. Replace dust bag
and bag compartment cover.
Use GE brand replacement motor filter, 61455-1.
(continued)
(B)
Paper Bag
Collar
Motor
Filter
(A)
Channels
(C)
Hose Inlet
Bag
Compartment
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

71045

Table of Contents