Configpro; Updating A D20 Configuration To Use The D20Mx Firmware Definition With Configpro - GE D20MX User Manual

Updating a D20 configuration to use the D20MX firmware definition
with ConfigPro
Prerequisites
Procedure
76
Before you can update the firmware definition of a D20 device configuration, the following
components must be present:
• ConfigPro 5.03 or higher installed on the configuration computer.
• The D20MX Documentation CD (part number 588-0075/00) installed in a CD/DVD drive
of the configuration computer.
To update a D20 or D200 device configuration to the D20MX:
1. Start Config Pro 5.03 or higher.
Result: The main window of ConfigPro appears with the tree view of the project
directory on the left.
2. Choose the D20MX Factory Default Configuration file, 10730-00.zip or 10731-00.zip.
based on the following criteria:
– If transferring a configuration containing B009 versions greater than 310 and
B021 versions greater than 912 use the file 10730-00.zip
– If transferring a configuration containing B009 versions less than or equal to 310
and B021 versions less than or equal to 912, use the file 10731-00.zip.
3. Select from the menu bar Project > Archive Project > Restore.
Result: The Restore Project from ZIP File dialog appears
4. Under the Select Source Project ZIP File area, click the document icon.
Result: The Select a Project ZIP file to Restore dialog appears.
5. Navigate to the DVD/CD drive > Configuration Files > ConfigPro.
Result: The two files 10730-00.zip and 10731-00.zip appear in the dialog.
6. Select the appropriate file based on your decision made in the second step and click
the Select button.
Result: The Restore Project from ZIP File dialog appears with the selected file showing
under the Select Source Project ZIP File area.
7. Under the "Restore To" area, click the folder icon.
Result: The Select the Destination Project Directory dialog appears.
8. Navigate to your ConfigPro project folder on a hard drive of the configuration
computer. The project folder is typically named C:\WESDATA.
Result: The contents of the project folder are displayed, and the file named
WPL400.DB is selected.
9. Click the Select button.
Result: The Restore Project from ZIP File dialog reappears with the Project Directory set
to the folder you selected in the previous step.
10. Change the Project Name if desired and click OK.
Result: The main window of ConfigPro appears with the tree view of the project
directory on the left. The new D20MX factory default project appears in the tree view.
11. Double-click on the D20MX factory default project.
Result: The Main Page of the D20MX factory default project appears with the FAC_DEF
device placed on the page.
12. Double-click the FAC_DEF device.
Result: The Missing Applications! dialog appears.
CHAPTER 5: CONFIGURING THE SOFTWARE
GENERAL D20MX HARDWARE USER'S MANUAL