Kenmore 119.1614521 Use & Care Manual page 21

Install Grill Transport Handle
12
Attach Grill Transport Handle and 2 Handle Heat Shields to the back of the firebox using 4 Flat Head
Bolts (M6x25mm).
Transport Handle
Heat Shield
Qty: 2
Flat Head Bolt
M6x25mm
Qty: 4
Place and Secure LP Cylinder into the Cabinet
13
Be sure the LP cylinder is "Off" by turning the hand wheel clockwise until it stops. Be sure all burner
control knobs are turned to the "Off" position.
Place the LP cylinder down into the tank support hole in the bottom of the cabinet.
Remove the safety cap from the cylinder valve. Center the nipple of the regulator into the cylinder
and turn the black nut clockwise until it stops. HAND TIGHTEN ONLY.
Hang the Propane Tank Support Chain around the LP tank and attach to its hook to secure the tank.
Propane Tank
Support Chain
Qty: 1
21