HP Cluster Platform Hardware Kits v2010 Installation Manual
Hp 16/18-port cable management kit installation guide (538272-doc)
Hide thumbs
Also See for Cluster Platform Hardware Kits v2010:
- Installation manual (20 pages) ,
- Hardware (4 pages) ,
- Installation manual (12 pages)
Table of Contents
Advertisement
Quick Links
HP 16/18-Port Cable Management Kit
Installation Guide
Abstract
This document describes how to attach the HP 16–Port or 18–Port Cable Management Kit to an HP rack. The cable management
bracket is designed to align and support the cables that lead from an HP BladeSystem c-Class enclosure's 16–port or 18–port
InfiniBand switch mounted in the rear of the chassis to another c-Class InfiniBand switch or an InfiniBand interconnect installed
in an adjacent rack. The cable management bracket currently supports the HP BLc QLogic 4X QDR InfiniBand Switch
(505958-B21) and the HP BLc 4X FDR InfiniBand Switch (648312-B21), but it can potentially be used for other configurations,
as deemed necessary.
HP Part Number: 538272-doc
Published: April 2012
Edition: 2.0
Advertisement
Table of Contents
Related Manuals for HP Cluster Platform Hardware Kits v2010
Summary of Contents for HP Cluster Platform Hardware Kits v2010
-
Page 1: Installation Guide
HP 16/18-Port Cable Management Kit Installation Guide Abstract This document describes how to attach the HP 16–Port or 18–Port Cable Management Kit to an HP rack. The cable management bracket is designed to align and support the cables that lead from an HP BladeSystem c-Class enclosure's 16–port or 18–port InfiniBand switch mounted in the rear of the chassis to another c-Class InfiniBand switch or an InfiniBand interconnect installed in an adjacent rack. - Page 2 © Copyright 2009, 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
-
Page 3: Table Of Contents
Contents 1 Preparing for Installation................4 1.1 Audience..........................4 1.2 Documentation Resources.....................4 1.3 Kit Description........................4 1.4 Kit Contents........................4 1.5 Required Resources......................5 1.6 Prerequisites........................6 2 Aligning the Bracket...................7 3 Installing the Cable Management Bracket............9 3.1 Installing the Cable Management Bracket................9 3.2 Installing the Releasable Cable Ties for the InfiniBand Cables...........9 4 Removing InfiniBand Cables and Switches...........12 4.1 Removing a Damaged Cable From the c-Class Cable Management Bracket......12 4.2 InfiniBand Switch Removal....................12... -
Page 4: Preparing For Installation
1 Preparing for Installation 1.1 Audience This guide is intended for HP service representatives and other persons trained to install hardware options in HP racks. Such persons are expected to understand the hazards of working in this environment and to take suitable precautions to minimize danger to themselves and others. 1.2 Documentation Resources You can download the documentation for components referenced in this installation guide from the following locations:... -
Page 5: Required Resources
Figure 1 Bracket Hardware The following list describes the callouts in Figure HP 16-Port or 18-Port Cable Management Bracket Releasable cable tie Holes used for the push-button mounts Push-button mount Rail-mount hook (one on each end of the bracket) Mounting hole to fasten the bracket to the rack's rear rail (one on each end of the bracket) The fasteners that are specified in Table Table 1 Fasteners (Supplied with Cabinet Mounting Hardware) -
Page 6: Prerequisites
◦ Marker pen or masking tape ◦ Diagonal cutting pliers Resources: Cables of the type used by the HP BladeSystem c-Class InfiniBand switch. 1.6 Prerequisites Before you begin to mount the bracket: Follow the usual cable-handling precautions for InfiniBand cables, see the InfiniBand switch manual that came with your switch. -
Page 7: Aligning The Bracket
2 Aligning the Bracket Figure 2 shows the correct orientation of the cable management bracket which you must install before connecting the cables to the InfiniBand switch module. During the cabling procedure, the bracket provides strain relief for the InfiniBand ports, and maintains the correct minimum cable bend radius. - Page 8 The U location that aligns with the top of the HP BladeSystem c7000 enclosure. Each c7000 enclosure is 10U high. Mounting hook location (black square) and fastener location (circled square) for an InfiniBand switch installed in Interconnect Module Bays (IMB) 3 and 4 Mounting hook location (black square) and fastener location (circled square) for an InfiniBand switch installed in IMB 5 and 6 Mounting hook location (black square) and fastener location (circled square) for an InfiniBand...
-
Page 9: Installing The Cable Management Bracket
3 Installing the Cable Management Bracket The location of the cable management bracket depends on the rack position occupied by the HP BladeSystem c-Class enclosure. The InfiniBand switch might be installed in any or all of the interconnect module bays identified in Table 3.1 Installing the Cable Management Bracket Use the following procedure to install the HP BladeSystem c-Class enclosure cable management... - Page 10 Figure 4 A Cable Management Bracket Holding 16 InfiniBand Uplink Cables The following list describes the callouts shown in Figure Left rear rack column 16 secured InfiniBand cables One of the 16 releasable cable ties (completed assembly for 16-port switch shown) Important: You must install the HP BladeSystem c-Class enclosure cable management bracket to provide proper strain relief for the InfiniBand cables.
- Page 11 Figure 5 InfiniBand Cable Secured with a Releasable Cable Tie Caution: The releasable cable tie should only be hand tight. Do not use a cable tie installation tool and do not over tighten the releasable cable tie or it might damage the InfiniBand cable. Leaving approximately 1/4 inch to 3/8 inch coming out of the buckle, clip the excess from the releasable cable tie.
-
Page 12: Removing Infiniband Cables And Switches
4 Removing InfiniBand Cables and Switches This chapter describes the procedure to remove a damaged InfiniBand cable or InfiniBand switch for repair. 4.1 Removing a Damaged Cable From the c-Class Cable Management Bracket To remove a damaged cable, follow these steps: Bring the HP BladeSystem c-Class enclosure to an appropriate state for service as described in the HP BladeSystem c7000 Enclosure Maintenance and Service Guide on the HP website: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00714237/... - Page 13 Leave the cables secured in the cable management bracket and carefully set the bracket aside. Caution: Do not bend the InfiniBand cables more than the minimum bend radius recommended by the cable manufacturer. Push the blade handle release button to release the blade handle. Open the blade handle and slide the switch all the way out of the HP BladeSystem c7000 enclosure.
- Page 14 *538272-doc* Printed in the US...