Table of Contents
Advertisement
8.
If you use "QUICK SCAN" in step 7 and when you see the message ">>> SCAN COMPLETE <<<",
press the "EXIT" button several times until the main menu disappears.
9.
After you finish scanning, you can choose the suitable V.FORMAT. If you use an SDTV, use the
V.FORMAT "PAL" (for MODE-Switch being set to YP
recommended to change to "AUTO" by pressing V.FORMAT button; However, if your HD-ready TV
cannot display some specific video format, press V.FORMAT button to change to an appropriate
fixed format. (For more details, please refer to Appendix 2 System Setup Table in page 50).
10.
Congratulations! You have successfully setup your receiver.
P
only); If you use an HD-ready TV, you are
B
R
21
Advertisement
Table of Contents
