H - Agency Certification - GE Everest Ca-Zoom 6.2 Operating Manual

96
Appendix H – Agency Certifications
EUROPEAN EQUIPMENT CLASSIFICATION
Group 2, Class A
The CE mark on this product indicates it has been tested to conform to provisions noted within
the 89/336/EEC Electromagnetic Compatibility Directive. The Everest Ca-Zoom 6.2 system is in
conformance with the following standards:
EN61010-1
EN61326
Declarations of Conformity are held by GE Inspection Technologies' European Representative.
GE Inspection Technologies, GmbH
Product Service Center
Lotzenäcker 4
72379 Hechingen
Germany
Tel: +49 (0) 74719882 0
Fax: +49 (0) 74719882 16
SAFETY MARK
The Everest Ca-Zoom 6.2 system product is in compliance with the following standards.
UL61010-1
CAN/CSA C22.2 No. 61010-1
PARALLEL LASER ACCESSORY
The Parallel Laser accessory is in compliance with the following:
Laser Safety standards: EN60825-1:1994+A1+A2/IEC60825-1:1994+A1+A2
Class 3R Laser Product, 630nm-670nm, 5mW
INTRINSIC SAFETY
The Everest Ca-Zoom 6.2 Digital Inspection System camera and its accessories are not explo-
sion-proof, pressurized, or intrinsically-safe. Do not use in hazardous environements as defined
in NFPA 70 National Electrical Code, or IEC 79-10, or EN60079-10.
®
Everest Ca-Zoom 6.2