Table of Contents
Advertisement
B
C
ATCH
ONFIGURATION
The Batch Configuration tool allows you to execute a sequence of operations
in D-View. For example, Save Configuration, Retrieve Port Status, and so on.
With Batch Configuration you can configure multiple devices simultaneously.
Since all the configurations are similar, only one has been described below.
Remember to configure the OID information before using the Run Batch tool.
To configure the OID information of SafeGuard Engine:
1. Go to Application > Batch Config> Advanced Option. The Advanced
Option screen displays.
2. D-View supports a list of batch function templates. They are:
•
FIRM: Download firmware from the switch to the TFTP server or upload
firmware to the device.
•
CONFIGURE: Download/Upload config information in the device.
•
RESOURCE: Retrieve/Set the information about name, location,
contact of the device.
•
PORTSTATUS: Retrieve/Set the Port Enable status.
•
SAVE: Save the configuration changes in a device.
•
SPANNING: Enable/Disable the STP status in device.
•
RMON: Enable/Disable the RMON status in device.
•
SAFEGUARD: Enable/Disable the SAFEGUARD status in device.
3. Select SAFEGUARD and then click Next to continue. The Device Type
Config screen displays.
Figure 61:
Advanced Option screen
Advertisement
Table of Contents
