Table of Contents
Advertisement
{DELETE} {F1} (or other F Key) {ENTER}
Deletes the F1 (or other F Key) macro sequence.
"COPY" Command Line
{COPY} {ENTER}
Cause the SNAPSHOTS, COPY & LINK GUI to appear along with the
pop-up allowing Snapshots to be copied. Make appropriate selections
according to the pop-up and click on OK or press {ENTER}.
"LOAD" Command Lines
{LOAD} {SNAPSHOT} {ENTER} or {LOAD} {SNAPSHOT} # {ENTER}
Loads the currently highlighted SNAPSHOT or one specified by number
according to SNAPSHOT Defaults settings in the Snapshots GUI.
Ranges and Lists can be specified when loading Snapshots:
{LOAD} 1..5 {SNAPSHOT} {ENTER} or
{LOAD} 1..5 {SNAPSHOT} # {ENTER}
Loads the currently highlighted SNAPSHOT or one specified by number
according to SNAPSHOT Defaults for channels 1-5.
(See page 6-65 for details of how to specify Ranges and Lists)
{LOAD} {TITLE} {ENTER}
or {LOAD} {TITLE} # {ENTER}
Loads the appropriate CUES list for the currently highlighted TITLE or
one specified by number.
{LOAD} {MIX} {ENTER} or {LOAD} # {MIX} {ENTER}
Loads the currently highlighted MIX, or one specified by number, into
memory.
Note:
Auto-Saved mixes can be loaded as above. MIX 0 is the most recent whilst MIX -1
and MIX -2 are earlier Auto-Saves.
Ranges and Lists can be specified when loading Mixes:
{LOAD} 1..5 {MIX} {ENTER} or {LOAD} 1..5 {MIX} # {ENTER}
Loads the currently highlighted MIX or one specified by number
according to SNAPSHOT Defaults for channels 1-5.
(See page 6-65 for details of how to specify Ranges and Lists)
"PLAY" Command Lines
{PLAY} {ENTER}
Plays from the last locate point.
{PLAY} Timecode {ENTER}
Plays from a timecode point which is entered using the numeric key-pad.
6-67
Chapter 6 Technical Descriptions
Advertisement
Table of Contents
