To talk to the third party after placing the current call on hold
74XX
If Whisper OHCA is activated by the other party when you are engaged in a call, you
hear a confirmation tone. Then you will be engaged in both calls with the current
caller (two-way) and the third party (one-way).
HOLD
Press HOLD.
The current call is placed on hold.
The INTERCOM indicator light flashes green slowly.
Conditions
• This feature can be enabled to any PTs (other than KX-T7400 series PT) by System
Programming.
• If the Whisper OHCA sender does not use a KX-T7400 series telephone, Whisper OHCA
works as OHCA. If the receiver does not use a KX-T7400 series telephone, Whisper OHCA
may not work properly. (e.g., the announcement may be heard by the other party.)
• Class of Service programming determines which extension can perform Whisper OHCA.
• The Whisper OHCA receiving extension display shows the calling extension's number or
name for 5 seconds in 10 second intervals.
• You can select to receive a Call Waiting tone, OHCA, Whisper OHCA or none of these at
your extension.
• The receiving mode may shift depending on the setting on each telephone or the telephone
type.
<Example> If the user selects 3 (Whisper OHCA mode);
– If using a KX-TD7436 handset: Whisper OHCA
– If using a KX-TD7436 SP-PHONE: Call Waiting
– Other: Call Waiting
• The Whisper OHCA sender will receive a ringback tone in the following cases.
– If the receiver presses the TRANSFER, CONF, SP-PHONE, DSS or CO button.
– If the party who is talking with the receiver disconnects the line or presses the
TRANSFER, CONF or HOLD button.
Programming Guide References
[509] Off-Hook Call Announcement (OHCA)
User Manual References
4.3.7 Busy Station Signaling (BSS)
User Manual
Station Features and Operation (DPT/SLT)
Talk.
225