DN
NOTE:
For instructions on using the power tilt
switch, see pages 38 and 41.
EMU31431
Steering friction adjuster
A friction device provides adjustable resis-
tance to the steering mechanism, and can be
set according to operator preference. An ad-
juster lever is located on the bottom of the
tiller handle bracket.
UP
DN
ZMU05579
ZMU04899
UP
Basic components
To increase resistance, turn the lever to the
port side "A".
To decrease resistance, turn the lever to the
starboard side "B".
EWM00040
WARNING
Do not overtighten the friction adjuster. If
there is too much resistance, it could be
difficult to steer, which could result in an
accident.
B
If the resistance does not increase even
when the lever is turned to the port side "A",
make sure that the nut is tightened to the
specified torque.
1
1. Nut
Nut tightening torque:
5.8 Nm (4.3 ft-lb) (0.6 kgf-m)
A
ZMU05522
ZMU05523
19