Samsung DCS Programming Manual page 174

DCS
COMBINED PROGRAMMING MANUAL
ACTION
1. Open programming and select 606
Display shows (for example)
2. Press RIGHT soft key to advance cursor to next line
3. Press UP or DOWN key to select SYSTEM or EXT (ex-
tension)
If you select EXT, go to step 4
If you select SYSTEM, press RIGHT soft key and enter
valid number of blocks to assign
OR
Press UP or DOWN key to select and press RIGHT soft
key
OR
Press HOLD to delete block(s)
System returns to this step to make another selection
(If finished go to step 6)
4. Enter desired EXT (extension) number via dial keypad
(e.g., 205)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to advance cursor
5. Enter valid number for blocks (0–5)
OR
Press UP or DOWN key to make selection
OR
Press HOLD key to delete block(s)
6. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
System: 200 entries/20 blocks (100 entries/10 blocks for 408/408i)
Stations: One block of 10 entries
MMC 705 Assign System Speed Dial
MMC 706 System Speed Dial By Name
MMC 606 (Page 2 of 2)
MMC PROGRAMS
NOVEMBER 2001
DISPLAY
FREE LIST:60
SYSTEM:20
FREE LIST:60
SYSTEM:20
FREE LIST:60
SYSTEM:20
FREE LIST:60
EXT205:1
FREE LIST:60
EXT205:5