Assigning A Function To A Function; Button; Assigning A Function To A Function Button; Displaying The Assigned Functions - Sony BVMF170A Operation Manual

Assigning a Function to a
Function Button
You can assign a function other than the factory preset on
the function button of the controller. The functions
assigned to the function buttons can be displayed

collectively.

Assigning a Function to a Function

Button

1
Select the Function Key menu in the Controller menu.
2
Select F1 to F16 button, and then the function assigned
on each button.
Assignable functions
Scan Mode, Native Scan, 16:9, H Delay, V Delay, External
Sync, Comb, Char Off, Color Temp, Status, Aperture,
Mono, Blue Only, R Off, G Off, B Off, Chroma Up,
Interlace, Pixel Zoom, Capture Load, Marker, Aspect
Marker, Area Marker 1, Area Marker 2, Center Marker,
Aspect Marker-Line, Aspect Blanking-Half, Aspect
Blanking-Black, Side by Side, Wipe, Butterfly, Blending,
Error Notify Clear, Audio Level Meter, ALM Hold Reset,
Time Code, Difference, Checkerboard, L/R Switch,
Horopter Check, Flip H, Black Frame Insertion, Black
Detail Mode, Degauss
For details on the assigned function, see "Function Key"
(page 83) in the Controller menu.

Displaying the Assigned Functions

Collectively
When no menu is displayed on the screen, press the
ENTER button on the controller. The functions assigned to
function buttons F1 to F8 are displayed on the screen.
F1: Time Code
F2: Checkerboard
F3: L/R Switch
F4: Horopter
F5: Flip H
F6: Marker
F7: Status
F8: Interlace
Press the ENTER button again to display the functions
assigned to function buttons F9 to F16.
F9: 16:9
F10: Native Scan
F11: Capture Load
F12: Side by Side
F13: Wipe
F14: Butterfly
F15: Blending
F16: Pixel Zoom
If you press the ENTER button once again, the collective
display will disappear.
The following functions are displayed as an abbreviation.
Aspect Marker-Line: A-Marker Line
Aspect Blanking-Half: A-Blank Half
Aspect Blanking-Black: A-Blank Black
Error Notify Clear: Error Clear
Black Frame Insertion: Black Frame
Black Detail Mode: Black Detail
Audio Level Meter: ALM
ALM Hold Reset: ALM Hold Rst
Horopter Check: Horopter
Notes
• Use the controller with software version 1.7 or higher to
display the functions assigned to the function buttons
collectively.
• The UP/DOWN buttons and the PHASE knob on the
controller are disabled when the list of the functions
assigned to the function buttons is displayed.
• Pixel Zoom is not set to on when the list of the functions
assigned to the function buttons is displayed.

Assigning a Function to a Function Button

101