Installing The Switch; Included Parts - HP ProCurve 6400cl Installation And Getting Started Manual

Installing the Switch

The ProCurve Series 6400cl Switch devices come with an accessory kit that
includes the brackets for mounting the switch in a standard 19-inch telco rack,
in an equipment cabinet, and with rubber feet that can be attached so the
switch can be securely located on a horizontal surface. The brackets are
designed to allow mounting the switch in a variety of locations and
orientations. This chapter shows how to install the switch.

Included Parts

The Series 6400cl Switch devices have the following components shipped with
them:
ProCurve Series 6400cl Switch Installation and Getting Started Guide,
this manual
ProCurve Product Documentation CD ROM
(contains PDF file copies of the documentation for the Series 6400cl
Switch devices, including the Management and Configuration Guide,
and for most other ProCurve switches)
ProCurve Manager - CD ROM and booklet
Read Me First
Customer Support/Warranty booklet
Console cable
Accessory kit (5069-5705)
• two mounting brackets
• eight 8-mm M4 screws to attach the mounting brackets to the switch
• four 5/8-inch number 12-24 screws to attach the switch to a rack
• four rubber feet
2
2-1