Dell Latitude C810 Service Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Laptop
  5. Latitude C810
  6. Service manual
Dell Latitude C810 Service Manual

Dell Latitude C810 Service Manual

Hide thumbs Also See for Latitude C810:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Dell Latitude C810 Service Manual

Advertisement

Table of Contents
loading

Related Manuals for Dell Latitude C810

Summary of Contents for Dell Latitude C810

  • Page 1 Thank you for purchasing this Factory Service Manual CD/DVD from servicemanuals4u.com. Please check out our eBay auctions for more great deals on Factory Service Manuals: servicemanuals4u...

  • Page 2: Notes, Notices, And Cautions

    Dell Latitude C810 Service Manual Dell™ Latitude™ C810 Service Manual Before You Begin Preparing to Work Inside the Computer Recommended Tools Screw Identification Removing and Replacing Parts System Components Hard Drive Fixed Optical Drive Memory Module Mini PCI Card Assembly...
  • Page 3 Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Computer Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

  • Page 4: Before You Begin

    NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. NOTICE: To avoid damaging the computer, perform the following steps before you begin working inside the computer.

  • Page 5: Recommended Tools

    Before You Begin : Dell Latitude C810 Service Manual NOTICE: To avoid component damage, always remove any installed batteries before you service the computer. 11. Remove any device installed in the modular bay. 12. To dissipate static electricity while you work, periodically touch an unpainted metal surface on the computer chassis.

  • Page 6: Screw Identification

    Before You Begin : Dell Latitude C810 Service Manual Screw Identification When you are removing and replacing components, photocopy the placemat as a tool to lay out and keep track of the component screws.The placemat provides the number of screws and the sizes.
  • Page 7 Before You Begin : Dell Latitude C810 Service Manual NOTICE: When reinstalling a screw, you must use a screw of the correct diameter and length. Make sure that the screw is properly aligned with its corresponding hole, and avoid overtightening.

  • Page 8: System Board

    Before You Begin : Dell Latitude C810 Service Manual Palmrest to System Board: LED Board: Bottom Case Assembly: M2.5 x 4 mm captive M2.0 x 4 mm (2 M2.5 x 20 mm (9 each) washer each) (3 each) Palmrest Bracket: M2.5 x 4 mm (2 each)

  • Page 9: Removing And Replacing Parts

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Back to Contents Page Removing and Replacing Parts Dell™ Latitude™ C810 Service Manual System Components Video Graphics Board Hard Drive Palmrest Assembly Fixed Optical Drive Reserve Battery Memory Module System Board Assembly...
  • Page 10 Removing and Replacing Parts : Dell Latitude C810 Service Manual file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...Latitude/C810/C810_SERVICE_MANUAL/2e40520.htm (2 of 46)6/21/2004 1:32:49 AM...

  • Page 11: Hard Drive

    NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. NOTICE: Unless otherwise noted, each procedure in this manual assumes that a part can be replaced by performing the removal procedure in reverse order.

  • Page 12: Removing The Hard Drive

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing the Hard Drive 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the drive door screw. 3. Pull the hard drive out. Replacing the Hard Drive 1.

  • Page 13: Removing The Fixed Optical Drive

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing the Fixed Optical Drive 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Loosen the captive screw on the bottom of the computer. NOTICE: To keep the pull tab from catching on the captive screw, turn the computer over before removing the fixed optical drive.

  • Page 14: Removing The Memory Module Cover

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing the Memory Module Cover Memory Module Cover 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the screw. 3. Disengage the metal tabs at the opposite end of the cover.

  • Page 15: Removing The Memory Modules

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing the Memory Modules 1. Remove the memory module cover. 2. To release a memory module from its socket, spread apart the tabs at each side of the module until the module pops up slightly.

  • Page 16: Mini Pci Card Assembly

    Removing and Replacing Parts : Dell Latitude C810 Service Manual and reinstall it. 4. Insert the metal tabs on the memory module cover into the bottom case assembly, rotate the cover down, and replace the screw. Mini PCI Card Assembly You must remove the optional Mini PCI Card assembly before the system board assembly can be removed.

  • Page 17: Removing The Mini Pci Card Assembly

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing the Mini PCI Card Assembly 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the Mini PCI Card cover. 3. To release the Mini PCI Card assembly, spread the metal securing tabs until the assembly pops up slightly.
  • Page 18 Removing and Replacing Parts : Dell Latitude C810 Service Manual Mini-PCI Wireless NIC Assembly Using Antenna Cable file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...Latitude/C810/C810_SERVICE_MANUAL/2e40520.htm (10 of 46)6/21/2004 1:32:49 AM...

  • Page 19: Keyboard Assembly

    Removing and Replacing Parts : Dell Latitude C810 Service Manual NOTICE: If a wireless NIC card contains two mini-coax antenna connectors, connect the mini- coax antenna cable to the outermost antenna connector on the card as shown. NOTICE: If you are installing a wireless NIC, fold and tuck the unused wiring harness into the slot so it does not interfere with the cover.

  • Page 20: Removing The Keyboard Assembly

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Keyboard Screws Removing the Keyboard Assembly 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Turn the computer over and remove the four screws labeled with a "circle K."...
  • Page 21 Removing and Replacing Parts : Dell Latitude C810 Service Manual 5. Lift the right end of the keyboard and slide it slightly toward the right side of the computer to disengage the tabs at the left end. 6. Pivot the keyboard and balance it upright on the left side of the computer.

  • Page 22: Replacing The Keyboard Assembly

    Removing and Replacing Parts : Dell Latitude C810 Service Manual 7. Disconnect the keyboard cable and lay the keyboard assembly aside. Replacing the Keyboard Assembly 1. While bracing the keyboard assembly upright on its left end, connect the keyboard cable to the interface connector on the system board.

  • Page 23: Display And Bezel Assemblies

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Display and Bezel Assemblies NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.

  • Page 24: Removing The Hinge Cover

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing the Hinge Cover Hinge Cover 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Use a nonmarring tool to loosen the hinge cover at the back and at each side of the computer.
  • Page 25 Removing and Replacing Parts : Dell Latitude C810 Service Manual 1. Remove the hinge cover. NOTICE: Make sure you remove the flex cable before you remove the display assembly. Flex Cable file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...Latitude/C810/C810_SERVICE_MANUAL/2e40520.htm (17 of 46)6/21/2004 1:32:49 AM...
  • Page 26 Removing and Replacing Parts : Dell Latitude C810 Service Manual 2. Remove the 6-mm screw that secures the display flex cable to the strain relief, and then use the pull loop to remove the display flex cable from the graphics card.

  • Page 27: Removing The Display Assembly Bezel

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing the Display Assembly Bezel 1. Use a scribe to pry out the four rubber screw covers located across the top of the bezel. 2. Remove the four 4-mm screws located across the top of the bezel.

  • Page 28: Removing The Display Panel

    Removing and Replacing Parts : Dell Latitude C810 Service Manual the bezel. 4. Remove the two 4-mm screws located at the bottom of the bezel. 5. Separate the bezel from the display-assembly top cover. The bezel is secured to the display assembly top cover with plastic tabs around the sides. Use a plastic scribe to help separate the bezel from the top cover.

  • Page 29: Replacing The Display Panel

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Replacing the Display Panel NOTE: Use a magnetic screwdriver to reassemble the display panel in the display. 1. Connect the flex cable to the two connectors on the back of the display panel.

  • Page 30: Removing The Display Latch

    Removing and Replacing Parts : Dell Latitude C810 Service Manual 4. Starting on the left side, use a magnetic screwdriver to reinstall the six 3-mm screws that secure the display panel in the top cover. 5. Reinstall the display flex cable strain-relief screw and reconnect the flex cable to the graphics card.

  • Page 31: Removing The Microprocessor Thermal Cooling Assembly

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Microprocessor Thermal Cooling Assembly NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.

  • Page 32: Microprocessor Module

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Microprocessor Thermal Cooling Assembly NOTICE: To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the microprocessor thermal cooling assembly. The oils in your skin reduce the heat transfer capability of the thermal pads.

  • Page 33: Removing The Microprocessor Module

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing the Microprocessor Module 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the keyboard. 3. Remove the hinge cover. NOTICE: To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the thermal cooling assembly.

  • Page 34: Replacing The Microprocessor Module

    If you received a flash BIOS update program diskette or CD with the replacement microprocessor, you must update the BIOS after replacing the microprocessor module. For instructions on updating or reflashing the BIOS, see the Dell Portable Computer BIOS Update Guide.
  • Page 35 Removing and Replacing Parts : Dell Latitude C810 Service Manual When the microprocessor module is correctly seated, all four corners are aligned to the same height. If one or more corners of the module are higher than the others, the module is not seated correctly.

  • Page 36: Removing The Video Graphics Board

    Removing and Replacing Parts : Dell Latitude C810 Service Manual latch. Video Graphics Board NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.

  • Page 37: Replacing The Video Graphics Board

    5. Remove the three 8-mm screws that secure the video graphics board. 6. Separate the video graphics board from the system board connector. Replacing the Video Graphics Board 1. Align the three screw holes and press down firmly on the word "Dell" to seat the board in its connector. NOTICE: Make sure the board is correctly and firmly seated before continuing.

  • Page 38: Removing The Palmrest Assembly

    Removing and Replacing Parts : Dell Latitude C810 Service Manual NOTICE: The reserve battery provides power to the computer's time RTC and NVRAM when the computer is turned off. Removing the palmrest disconnects the reserve battery and causes the computer to lose the date and time information as well as all user-specified parameters in NVRAM.

  • Page 39: Reserve Battery

    Removing and Replacing Parts : Dell Latitude C810 Service Manual 6. Turn the computer over. 7. Remove the nine 20-mm screws (labeled with a "circle P") that secure the palmrest to the computer. Palmrest Screws 8. Turn the computer over.

  • Page 40: Removing The Reserve Battery

    Removing and Replacing Parts : Dell Latitude C810 Service Manual NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.

  • Page 41: Replacing The Reserve Battery

    Removing and Replacing Parts : Dell Latitude C810 Service Manual 5. Remove the palmrest assembly. 6. On the underside of the palmrest, disconnect the flex cable from the ZIF connector. Palmrest Flex Cable and Bracket 7. Remove the two 4-mm screws securing the palmrest bracket.

  • Page 42: System Board Assembly

    Removing and Replacing Parts : Dell Latitude C810 Service Manual ZIF connector. 4. Replace the two 4-mm screws that secure the palmrest bracket to the palmrest. System Board Assembly NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.

  • Page 43: Removing The System Board

    If you received a flash BIOS update program diskette or CD with the replacement microprocessor, you must update the BIOS after replacing the microprocessor module. For instructions on updating or reflashing the BIOS, see the Dell Portable Computer BIOS Update Guide.
  • Page 44 Removing and Replacing Parts : Dell Latitude C810 Service Manual 2. Remove the hard drive and the fixed optical drive. 3. Remove any installed Mini PCI Cards. 4. If migrating the memory, remove all installed memory modules. 5. Remove the keyboard.

  • Page 45: Battery And Modular Bay Latch Assemblies

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Battery and Modular Bay Latch Assemblies NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.

  • Page 46: Removing And Replacing The Battery And Modular Bay Latch Assemblies

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing and Replacing the Battery and Modular Bay Latch Assemblies 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the keyboard. 3. Remove the hinge cover.

  • Page 47: Battery Charger Board

    Removing and Replacing Parts : Dell Latitude C810 Service Manual 6. Remove a latch button from the bottom case assembly by squeezing the snap tabs in the center of the latch. Apply downward pressure to the tabs while squeezing them together (tweezers work well) to eject the latch button from the bottom of the case without loosening the upper latch assembly (spring and slider).

  • Page 48: Removing The Battery Charger Board

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing the Battery Charger Board 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the keyboard. 3. Remove the hinge cover. 4. Remove the display assembly.

  • Page 49: Removing The Led Board

    Removing and Replacing Parts : Dell Latitude C810 Service Manual LED Board NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer.

  • Page 50: Replacing The Led Board

    Removing and Replacing Parts : Dell Latitude C810 Service Manual 3. Remove the two 4-mm screws. 4. Lift the LED board away from its connector. Replacing the LED Board 1. Align the two screw holes with the two mounting holes on the bottom case assembly, and press the board into its connector.
  • Page 51 Removing and Replacing Parts : Dell Latitude C810 Service Manual 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the system board. 3. Remove the three 4-mm screws from the fan assembly. 4. Disconnect the two fan cables from the system board.
  • Page 52 Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing the Protective Covers From the RJ-11 and RJ-45 Connectors Remove a plastic connector cover (if necessary) by slipping a nonmarring tool into the cutout at the top and pivoting the tool up to disengage the inner securing tab.

  • Page 53: Removing The Rj-11/Rj-45 Board

    Removing and Replacing Parts : Dell Latitude C810 Service Manual Removing the RJ-11/RJ-45 Board 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the system board. 3. Remove the 4-mm screw from the RJ-11/RJ-45 board. NOTICE: The plastic tab is fragile;...
  • Page 54 Removing and Replacing Parts : Dell Latitude C810 Service Manual Back to Contents Page file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...Latitude/C810/C810_SERVICE_MANUAL/2e40520.htm (46 of 46)6/21/2004 1:32:50 AM...

Table of Contents