2 - 34 MC3000 Integrator Guide
Serial Connection Setting
Figure 2-46
Tap OK to save any changes made.
9.
NOTE Every mobile computer should have a unique device name. Never try to synchronize more than one mobile
computer to the same name.
Connect the device to the host computer. See
10.
or see
Figure 2-19 on page 2-19
NOTE The cradle requires a dedicated port. It cannot share a port with an internal modem or other device. Refer to
the host computer documentation to locate the serial port(s).
Upon connection, synchronization occurs automatically.
11.
USB Connection Setup
The USB communication setup is used to set up to communicate between the host and the mobile computer using
either a Single Slot Serial/USB cradle or using one of the serial MC3000 Communication/Charge cables.
NOTE For serial communication using the Single Slot Serial/USB cradle, connect only the USB cable, do not connect
both the USB cable and the serial cable. If both serial and USB communication cables are required, the host
computer USB port is the default setting in ActiveSync.
On the mobile computer, tap
1.
window appears.
Properties
PC Connection Properties Window
Figure 2-47
Tap the
2.
Change Connection
Figure 2-1 on page 2-3
for cable connections.
> Settings > Control Panel > PC Connection icon.
button.
to set up a Single Slot Serial/USB cradle,
The
PC Connection