D-Link DSA-3100 - Airspot - Gateway User Manual page 39

DSA-3100 Airspot Public/Private Gateway User Manual
•
User Control¡ G When User Control is disabled, only activate MAC Address Control
function. .
•
General Account: Define Session Length, Idle Timer, Bandwidth limitation, Multiple Login
and General Login Schedule.
1.) Session length: Limit the duration for each session established by General Account,
from 5 min~12 hours.
2.) Idle Timer: When enabled, on-line users with no network activity after the
specified period will be logged out automatically. The period can range from 1~1440,
with 10 minutes as the default value.
3.) Bandwidth Limitation: Limit the outbound traffic bandwidth for each session
established by Guest Account. There is no limit to the duration by default
4.) Enable Multiple Login: Check this function to allow a single user account to log into
the system multiple times.
5.) General Login Schedule: Define the time where DSA-3100 is located and login
duration for General accounts. Select Enable - Edit to enter the management
interface (Please refer to the below table). After durations are defined, you need to
click Apply, and then Save All to let the new functions take effect.
Note: To let the functions take effect, you need to click Apply, and then Save All after
Enable is selected.
32