Panasonic EASA-PHONE KX-T123210 Installation Manual page 212

Electronic modular switching system
Hide thumbs Also See for EASA-PHONE KX-T123210:
Table of Contents

Advertisement

l
Keep the unit away from heating appliances and electrical noise generating devices
such as fluorescent lamps, motors and television. These noise sources can interfere
with the performance of the EASA-PHONE.
l
This unit should be kept free of dust, moisture, high temperature and vibration, and
should not be exposed to direct sunlight.
l
Never attempt to insert wires, pins, etc . into the vents or other holes of this unit
l
If there is trouble, disconnect the unit from the telephone line. Plug the telephone
directly into the telephone line. If the telephone operates properly, do not reconnect
the unit to the line until the trouble has been repaired by an authorized Panasonic
Factory Service Center. If the telephone does not operate properly, chances are that
the trouble is in the telephone system, and not in the unit.
l
Do not use benzine, thinner, or similar solvents. Do not use abrasive powder to clean
the cabinet. Wipe it with a soft cloth.
"WARNING -This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and found to
comply with the limits for a Class A computing device pursuant to Subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection against such
interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the
user at his own expense will be required to take whatever measures may be
required to correct the interference."
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
OTHERS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents