Panasonic HNP11 Operating Instructions Manual page 89

Problem
There were timers that could not
be deleted. Try again.
Is it OK to apply the proxy settings
to all cameras?
All cameras have been set to use
proxy settings.
Applying proxy settings to all
cameras has failed. Apply
individually.
"XXXX" error occurred during
importing.
"XXXX" =
• File Type
• File Size
• Memory Shortage
• Open
The number of registered cameras
reached the maximum of "XXX"
cameras, so importing was
canceled.
"XXX" =
• 64
Exporting failed.
License registration is complete.
Cause and Remedy
• This software is malfunctioning. (This
message is not normally displayed.)
Restart your PC.
• You checked [Use a proxy server] on the
network page of the preferences. (The camera
should be registered.)
Follow the instruction message.
• You clicked [Yes] in the "Is it OK to apply the
proxy settings to all of the cameras?"
message, and the saving is complete.
Follow the instruction message.
• You clicked [Yes] in the "Is it OK to apply the
proxy settings to all of the cameras?"
message, but the saving is failed.
Check the [Use Proxy Server] box for each
camera on the registration information
change or basic settings page.
• This software cannot import from the file at
[Tools] [Import Camera Settings].
The file is broken.
• The registered cameras has reached the
maximum limit during import.
Delete unnecessary cameras.
• This software cannot export to the file at
[Tools] [Export Camera Settings].
The file is broken.
• License registration is complete.
Operating Instructions
89