Toshiba Strata CIX Programming Manual page 130

Telephone button programming manual
Hide thumbs Also See for Strata CIX:
Table of Contents

Advertisement

System Error Codes
Trunk Programming Error Codes
Program
Code
302
2-14
Occurred
Sub-
FB
parameter
FB01
33
FB03
33
FB04
33
FB07
48
FB03
49
FB04
49
FB01
49
49
-
49
-
FB02
49
FB02
49
FB02
49
FB02
49
FB07
49
FB07
49
FB07
49
FB24
50
FB00
52
FB00
54
FB00
80
FB01
80
FB03
80
FB04
80
FB00
96
Error Descriptions
The equipment number entered is out of the range.
The ILG entered is out of the range.
The entered OLG is out of the range.
Dch position is not set to 16. When setting the time slot
pattern for a 2048 kbps interface, this value must be set to 16.
The type of ILG or OLG entered in not an ISDN.
The ILG or OLG entered does not exist in the system.
When the equipment is moved, the number of the PCM
highway in the moved equipment is different from the current
equipment.
The ILG entered is not registered in the system.
FB which this error occur : FB03
The OLG entered is not registered in the system.
FB which this error occur : FB03
When the card type is ìPTU1Fî, the protocol type entered
should be ìBellcoreî or ìBellcore Northern Telecomî.
When the card type is ìPTUî, the protocol type entered is
ìETSIî.
The card type is not ìIPU-Qî when IP is selected.
The card type is not ìPTUî or ìPTU1Fî when TTC or QSIG is
selected.
When the card type is ìPTU1Fî, the inputted D channel
position is not 16.
D channel position must assign ì0î when the card type is
ìIPU-Qî.
D channel position must not be assigned ì0î when the card
type is not ìIPU-Qî.
The T-Wait Timer can only be enabled if the Protocol is set to
National ISDN.
The entered Channel Group conflicts with an existing ISDN
extension(s), etc.
The quantity of lines, ISDN channels and PDNs entered
exceeds the number of ports licensed with this processor.
The entered Channel Group number does not exist in the
system.
An ISDN trunk cannot be assigned to the designated Shelf/
Slot/Circuit.
The designated ILG does not exist in the system.
The designated OLG does not exist in the system.
The number of allowable Channel Groups has been exceeded
when a new ISDN trunk assignment is made.
Strata CIX/CTX Telephone Button Programming 11/04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata ctxStrata ctx28Strata ctx100Strata ctx670

Table of Contents