Cleaning And Care; Cleaning The Outer Casing, The Interior And Accessories - Miele KWL 4712 S ed Operating And Installation Manual

Cleaning and care

Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Stainless steel surfaces can be
treated using a conditioning agent
for stainless steel such as Neoblank
(available for the Miele UK Spare
Parts Department). Follow the
manufacturer's instructions on the
label.
Make sure that no water can
penetrate into the electronic unit or
into the lighting.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
20
Before cleaning
^ Switch the appliance off at the wall
socket and remove the plug.
^ Take out any removable parts, e.g.
shelves, for cleaning.
Cleaning the outer casing, the
interior and accessories
Use warm water with a little washing up
liquid. Accessories and shelves should
all be hand-washed only.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ Clean stainless steel surfaces with a
suitable cleaning agent following the
manufacturer's instructions on the
packaging.
^ After cleaning, wipe the interior and
accessories with a damp cloth, and
dry with a soft cloth. Leave the door
open to air the appliance for a short
while.
E-Cloth
^ A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals.