Page 1
SHARR AQUOS LC-19SB28UT LC-22SB28UT LIQUID CRYSTAL TELEVISION TI_LI_VISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LiQUIDO Hii::llml ITI DOLBY input DIGITAL ] IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuiliez lire ce mode d'empIoi avant de commencer a utiliser I'appareil.
LC-19SB28UT LC-22SB28UT LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: Model No.: • To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The Serial No.: numbers are located at the rear of the TV. IMPORTANT INFORMATION WARNING:...
RESPONSIBLE PARTY: SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 TEL: 1-800-BE-SHARP For Business Customers: URL http://www, sharpusa, corn INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
Page 5
IMPORTANT SAFETY INSTRUCTIONS EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL • Outdoor Antenna Grounding -- If an outside antenna is ELECTRICAL CODE, ANSI/NFPA connected to the television equipment, be sure the antenna ..< ANTENNA LEAD system is grounded so as to provide some protection against IN WIRE voltage surges and built-up static charges.
Page 6
• If the display panel is dusty, use an anti-static brush, which is commercially available, to clean it. • To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (OOZ-LCD-CLOTH) or triple (OOZ-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for ordering, or VISIT www.sharpusa.com/SharpDirect.
Supplied accessories Make sure the following accessories are provided with the product. :{emote control unit (xl) "AA" size battery (x2) AC cord (xl) Stand unit (xl) and Operation manual (xl I Page 8 Page 8 Page 7 Screws (x3) Page 6 •...
Page 8
QUICK REFERENCE QUICK INSTALLATION TIPS 1 Attach your antenna to the back of the TV. (See page 12.) Connect the AC plug for the TV into the wall outlet. • Place the TV close to the AC outlet, and keep the power plug within reach.
Page 9
If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the power on. IMPORTANT: IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. (_=8...
Contents IMPORTANT INFORMATION ........1 Other convenience functions ....... 26 License information ..........Menu operation buttons ........26 DEAR SHARP CUSTOMER ........Quick guide for MENU operation ....... 26 IMPORTANT SAFETY INSTRUCTIONS ....3 Appendix ..............Supplied accessories ..........Troubleshooting ..........
Part names Channel A/A button Remote control sensor POWER indicator Channel v/T button MENU button INPUT/ENTER button • The buttons on the main unit have the same functions as POWER button the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation using the remote control.
Part names POWER: Switch the power on or enters standby mode. (See page 18.) 0-9: Set the channel. (See page 18.) • (DOT): (See page 18.) FREEZE: Set the still image. Press again to return to POWER DISPLAY INPUT normal screen. •...
Preparation Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. • Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.
Using external equipment An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following: • Over-the-air broadcasting via HD quality antenna • HD cable/satellite subscription •...
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See page 13.) For connecting the TV to external equipment, use commercially available...
Connecting to External Equipment • When using Component cable (INPUT • Blu-ray disc player • DVD player • HD cable/satellke set-top box Component video cable Rear of the TV P8(Blue) Y (Green) AUDIO-L (White)_[___ AUDIO-R (Red) Audio cable • See page 14 for connecting a Blu-ray disc player, DVD player or an HD cable!satellite set-top box to the HDMI terminal. •...
Connecting to External Equipment • When using coaxial cable: Itis possibleto outputaudio through the DIGITALAUDIOCOAXIALterminal. Coaxial cable Rear of the TV • When using HDMI cable (INPUT 3): Rearofthe TV HDMt-cerliti_d cacill £ • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMt-certified cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI terminal and set "HDMI1 Audio"...
Connecting to External Equipment • When using analog RGB cable (INPUT 4): Rearof the TV Analog RGB cable (D-sub 15pin cable or VGA cable) @ 3.5 mm stereo minijack cable • When using an analog RGB cable, input the audio signal to the AUDIO PC!HDMI terminal of INPUT 4. To view an image from a PC, perform the following procedure.
Watching TV Press POWER on the TV, or POWER on the remote Perform the following steps before you press POWER on the remote control unit. control. • The TV enters standby mode and the image on the screen Insert the batteries into the remote control unit.
Watching TV Auto Ch Memory makes the TV look for all channels Press DISPLAY to display the current channel viewable in the set area. input source) information on the screen. When the TV receives a digital signal, the digital information Press MENU and the MENU screen displays.
Watching TV ii!i!i!_!_!_!i!i!!;i!;i _!!_i_i_i_i_i_!_i_i_i_:;_%_%_!_!_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_i_!_!!_!_!_!_!_i_!ii;ii!_!_!_i_!_i_i_!_!_;_i!;!;!;!;!;!;!;!;!;!;!_!_ _!ii!i'iiiiii!iiii_i!i_!i!i_i_i!i_i'i!i _ii ii!_ii!_ii!i!!!i!ii!ii!ii!ii!ii!ii!ii!i!i!ili%ii!i_!i_!i_!i_!i_!i_!i_i_i i_iiii_ii_i_i_i_i'ill _i_i_;_i!!ill_!_i_i_i_:_!_!_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_i_i _i!ii_ii_,i,!!,,_i _i_!i!_;!_i_;i_i,!!!iiiiiiiiiii_i;_!!iii When two or more audio languages are included in a Stretch mode is available for HD programs. digital signal, you can select one of the audio languages. Suitable for viewing wide-screen 1.78:1 aspect-ratio programs.
Watching TV ; _ i_i ¸i ¸ ii!i!Iiii;;Ii;Iiiii!iiIiiii!;!;ilIiiIii!!;i!II!i _i!i! ¸;¸ !i!ii_iiiii_ii!!!!!iiiii;iiiiiiiiiii! Fa,,,-or!te cl This function allows you to program 4 favorite channels in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. Programming favorite channel 1 Select the channel you want to register as a favorite channel.
Watching TV Tune the TV to the desired program. Press CC and the Closed Caption screen displays. Press _/_ to setting the"CC Setting" to"On". Press A/T to select"Analog Caption" or"Digital Caption". • Closed Caption might not appear according to the When you select "Analog Caption", you can choose condition of the signal from the broadcasting station.
Watching TV This function allows you to adjust the closed caption screen appearance to suit your preference. Allows you to use a password to protect certain settings from being accidentally changed. 1 Press MENU and the MENU screen displays. IMPORTANT: Press A/T to select"Setup", then press _ or ENTER.
Watching TV V-CHIP might not function according to the condition of the signal from the broadcasting station. V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable.
Watching TV • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
• If no buttons are pressed for more than approx. 60 seconds, the menu screen wil! return to normal screen (::_ (:_ (:Z:)(::Z::) automatically. FAVORITE SHARP MENU: Press to open the menu screen. Alvl_l_: Press to select a desired item on the screen or adjust a selected item.
Page 28
Other convenience functions Picture Picture Setting Brightness / Contrast / You can adjust the picture quality to your preference. Sharpness / Color / Tint Color Temperature Bluish (Cool) / Neutral (Standard) / Reddish (Warm) Backlight Backlight adjusts the screen brightness for improved picture clarity.
Appendix Problem Possible Solution • No power • Check if you pressed POWER on the TV, or on the remote control unit. (See page 18.) • Is the AC cord disconnected? (See page 7.) • Has the power been turned on? (See page 18.) •...
3erature at 77°F/25°C. • As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP. LIMITED WARRANTY CONSUMER LiMiTED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp...
Page 32
ELECI RONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario For more information on this Warranty, Sharp Extended Warranty Offers, Sharp Canada Products, Accessory Sales, Dealer or Service SHARP Locations, please call (905) 568-7140 Visit our Web site: www.sharp.ca...
Page 34
® SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Thailand Imprime en Thailande IIIIIIIIIIIIIIIMIIIIIIIIIIIIII Impreeo en Tailandia 9JDJ39X0131 B 10PO6-TH-NO J39X0131B SH 10/06N...